Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 289
/cfg/l3/igmp/igmpflt/filter <filter number>
IGMP Filter Definition
Table 172 describes the commands used to define an IGMP filter.
[IGMP Filter 1 Definition Menu]
range - Set IP Multicast address range
action - Set filter action
ena - Enable filter
dis - Disable filter
del - Delete filter
cur - Display current IGMP filter configuration
Table 172 IGMP Filter Definition Options
Command Syntax and Usage
range <IP multicast address (such as 224.0.0.10)> <IP multicast address>
Configures the range of IP multicast addresses for this filter.
action allow|deny
Allows or denies multicast traffic for the IP multicast addresses specified.
ena
Enables this IGMP filter.
dis
Disables this IGMP filter.
del
Deletes this filter’s parameter definitions.
cur
Displays the current IGMP filter.