Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
287
/cfg/l3/igmp/mrouter
IGMP Static Multicast Router Configuration
Table 170 describes the commands used to configure a static multicast router.
Note – When static Mrouters are used, the switch continues learning dynamic Mrouters via IGMP
snooping. However, dynamic Mrouters may not replace static Mrouters. If a dynamic Mrouter has
the same port and VLAN combination as a static Mrouter, the dynamic Mrouter is not learned.
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
clear - Remove all Static Multicast Router Ports
cur - Display current Multicast Router configuration
Table 170 IGMP Static Multicast Router Options
Command Syntax and Usage
add <port alias or number> <VLAN number> <IGMP version number>
Selects a port/VLAN combination on which the static multicast router is connected, and
configures the IGMP version (1, 2, or 3) of the multicast router.
remove <port alias or number> <VLAN number> <IGMP version number>
Removes a static multicast router from the selected port/VLAN combination.
clear
Clears all static multicast routers from the switch.
cur
Displays the current IGMP Static Multicast Router parameters.