Technical data

BLADE OS 5.0 Command Reference
286
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/igmp/snoop/igmpv3
IGMP Version 3 Configuration
Table 169 describes the commands used to configure IGMP version 3.
[IGMP V3 Snoop Menu]
sources - Set the number of sources to snoop in group record
v1v2 - Enable/disable snooping IGMPv1/v2 reports
exclude - Enable/disable snooping EXCLUDE mode reports
ena - Enable IGMPv3 Snooping
dis - Disable IGMPv3 Snooping
cur - Display current IGMP Snooping V3 configuration
Table 169 IGMP V3 Options
Command Syntax and Usage
sources <1-64>
Configures the maximum number of IGMP multicast sources to snoop from within the group
record. Use this command to limit the number of IGMP sources to provide more refined
control.
v1v2 enable|disable
Enables or disables snooping on IGMP version 1 and version 2 reports. When disabled, the
switch drops IGMPv1 and IGMPv2 reports. The default value is enabled.
exclude enable|disable
Enables or disables snooping on IGMPv3 Exclude Reports. When disabled, the switch
ignores Exclude Reports. The default value is enabled.
ena
Enables IGMP version 3. The default value is disabled.
dis
Disables IGMP version 3.
cur
Displays the current IGMP version 3 configuration.