Technical data

BLADE OS 5.0 Command Reference
278
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/ospf/virt <link number>
OSPF Virtual Link Configuration
[OSPF Virtual Link 1 Menu]
aindex - Set area index
hello - Set hello interval in seconds or milliseconds
dead - Set dead interval in seconds or milliseconds
trans - Set transit delay in seconds
retra - Set retransmit interval in seconds
nbr - Set router ID of virtual neighbor
key - Set authentication key
mdkey - Set MD5 key ID
enable - Enable interface
disable - Disable interface
delete - Delete interface
cur - Display current OSPF interface configuration
Table 163 OSPF Virtual Link Configuration Options
Command Syntax and Usage
aindex <area index (0-2)>
Configures the OSPF area index.
hello <1-65535)>
hello <50-65535ms)>
Configures the authentication parameters of a hello packet, in seconds or milliseconds.
dead <1-65535>
dead <1000-65535ms>
Configures the health parameters of a hello packet, in seconds or milliseconds. The default
value is 60 seconds.
trans <1-3600>
Configures the delay in transit, in seconds. Default is one second.
retra <1-3600>
Configures the retransmit interval, in seconds. Default is five seconds.
nbr <NBR router ID (IP address)>
Configures the router ID of the virtual neighbor. Default is 0.0.0.0.
key <password>
Configures the password (up to eight characters) for each virtual link. Default is none.