Technical data

BLADE OS 5.0 Command Reference
270
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/rip/redist fixed|static|ospf|eospf
RIP Route Redistribution Configuration
The following table describes the RIP Route Redistribute menu options.
[RIP Redistribute Fixed Menu]
add - Add rmap into route redistribution list
rem - Remove rmap from route redistribution list
export - Export all routes of this protocol
cur - Display current route-maps added
Table 158 RIP Redistribution Options
Command Syntax and Usage
add <1-32> <1-32>|all
Adds selected routing maps to the RIP route redistribution list. To add specific route maps,
enter routing map numbers, separated by a comma ( , ). To add all 32 route maps, type all.
The routes of the redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
rem <1-32> <1-32>|all
Removes the route map from the RIP route redistribution list.
To remove specific route maps, enter routing map numbers, separated by a comma ( , ). To
remove all 32 route maps, type all.
export <1-15>|none
Exports the routes of this protocol in which the metric and metric type are specified. To
remove a previous configuration and stop exporting the routes of the protocol, enter none.
cur
Displays the current RIP route redistribute configuration.