Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 269
trigg disable|enable
Enables or disables Triggered Updates. Triggered Updates are used to speed convergence.
When enabled, Triggered Updates force a router to send update messages immediately, even
if it is not yet time for the update message. The default value is enabled.
mcast disable|enable
Enables or disables multicast updates of the routing table (using address 224.0.0.9). The
default value is enabled.
default none|listen|supply|both
When enabled, the switch accepts RIP default routes from other routers, but gives them lower
priority than configured default gateways. When disabled, the switch rejects RIP default
routes. The default value is none.
metric <1-15>
Configures the route metric, which indicates the relative distance to the destination. The
default value is 1.
auth none|password
Configures the authentication type. The default is none.
key
Configures the authentication key password.
enable
Enables this RIP interface.
disable
Disables this RIP interface.
current
Displays the current RIP configuration.
Table 157 RIP Interface Options
Command Syntax and Usage