Technical data

BLADE OS 5.0 Command Reference
266
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/rmap <route map number> /aspath <autonomous system path>
Autonomous System Filter Path
Note – The rmap number (1-32) and the path number (1-8) represent the AS path you wish to
configure.
[AS Filter 1 Menu]
as - AS number
action - Set AS Filter action
enable - Enable AS Filter
disable - Disable AS Filter
delete - Delete AS Filter
cur - Display current AS Filter configuration
Table 155 AS Filter Options
Command Syntax and Usage
as <AS number (1-65535)>
Sets the Autonomous System filter’s path number.
action <permit|deny (p|d)>
Permits or denies Autonomous System filter action.
enable
Enables the Autonomous System filter.
disable
Disables the Autonomous System filter.
delete
Deletes the Autonomous System filter.
cur
Displays the current Autonomous System filter configuration.