Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 263
/cfg/l3/rmap <route map number>
Routing Map Configuration
Note – The map number (1-32) represents the routing map you wish to configure.
Routing maps control and modify routing information.
[IP Route Map 1 Menu]
alist - Access List number
aspath - AS Filter Menu
ap - Set as-path prepend of the matched route
lp - Set local-preference of the matched route
metric - Set metric of the matched route
type - Set OSPF metric-type of the matched route
prec - Set the precedence of this route map
weight - Set weight of the matched route
enable - Enable route map
disable - Disable route map
delete - Delete route map
cur - Display current route map configuration
Table 153 Routing Map Configuration Options
Command Syntax and Usage
alist <number 1-8>
Displays the Access List menu. For more information, see page 265.
aspath <number 1-8>
Displays the Autonomous System (AS) Filter menu. For more information, see page 266.
ap <AS number> [<AS number>] [<AS number>]|none
Sets the AS path preference of the matched route. You can configure up to three path
preferences.
lp <(0-4294967294)>|none
Sets the local preference of the matched route, which affects both inbound and outbound
directions. The path with the higher preference is preferred.
metric <(1-4294967294)>|none
Sets the metric of the matched route.