Technical data

BLADE OS 5.0 Command Reference
262
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/nwf <1-256>
Network Filter Configuration
[IP Network Filter 1 Menu]
addr - IP Address
mask - IP network filter mask
enable - Enable Network Filter
disable - Disable Network Filter
delete - Delete Network Filter
cur - Display current Network Filter configuration
Table 152 IP Network Filter Options
Command Syntax and Usage
addr <IP address, such as 192.4.17.44>
Sets the IP address that will be accepted by the peer when the filter is enabled. If used with the
mask option, a range of IP addresses is accepted. The default address is 0.0.0.0
mask <IP network filter mask>
Sets the network filter mask that is used with addr. The default value is 0.0.0.0
enable
Enables the Network Filter configuration.
disable
Disables the Network Filter configuration.
delete
Deletes the Network Filter configuration.
cur
Displays the current the Network Filter configuration.