Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 257
/cfg/l3/route
IPv4 Static Route Configuration
Up to 128 IPv4 static routes can be configured.
[IP Static Route Menu]
add - Add static route
rem - Remove static route
clear - Clear static routes
interval - Change ECMP route health check ping interval
retries - Change the number of retries for ECMP health check
ecmphash - Choose ECMP hash mechanism
cur - Display current static route configuration
Table 148 IP Static Route Configuration Options
Command Syntax and Usage
add <destination> <mask> <gateway> [<interface number>]
Adds a static route. You will be prompted to enter a destination IP address, destination subnet
mask, and gateway address. Enter all addresses using dotted decimal notation.
rem <destination> <mask> [<interface number>]
Removes a static route. The destination address of the route to remove must be specified
using dotted decimal notation.
clear {<destination IP address>|<gateway IP address>|all} [<value>]
Clears the selected IPv4 static routes.
interval <1-60>
Configures the ECMP health-check ping interval, in seconds. The default value is 1 second.
retries <1-60>
Configures the number of ECMP health-check retries. The default value is 3.