Technical data

BLADE OS 5.0 Command Reference
254
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/if <interface number>
IP Interface Configuration
The G8124 can be configured with up to 128 IP interfaces. Each IP interface represents the G8124
on an IP subnet on your network. The Interface option is disabled by default.
Interface 127 and interface 128 are reserved for switch management.
[IP Interface 1 Menu]
addr - Set IP address
mask - Set subnet mask
vlan - Set VLAN number
relay - Enable/disable BOOTP relay
ena - Enable IP interface
dis - Disable IP interface
del - Delete IP interface
cur - Display current interface configuration
Table 146 IP Interface Configuration Options
Command Syntax and Usage
addr <IPv4 address (such as 192.4.17.101)>
Configures the IPv4 address of the switch interface, using dotted decimal notation.
mask <subnet mask (such as 255.255.255.0)>
Configures the subnet address mask for the interface, using dotted decimal notation.
vlan <VLAN number>
Configures the VLAN number for this interface. Each interface can belong to only one
VLAN.
Each VLAN can contain multiple IPv4 interfaces.
relay disable|enable
Enables or disables the BOOTP relay on this interface. It is enabled by default.
ena
Enables this IP interface.
dis
Disables this IP interface.