Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 249
/cfg/l2/vlan <VLAN number>
VLAN Configuration
The commands in this menu configure VLAN attributes, change the status of each VLAN, change
the port membership of each VLAN, and delete VLANs. For more information on configuring
VLANs, see “Setup Part 3: VLANs” on page 26.
By default, VLAN 1 is the only VLAN configured on the switch. All ports are members of
VLAN 1 by default. Up to 1024 VLANs can be configured on the G8124.
VLANs can be assigned any number between 1 and 4094. VLAN 4095 is reserved for switch
management.
[VLAN 1 Menu]
privlan - Private-VLAN Menu
name - Set VLAN name
stg - Assign VLAN to a Spanning Tree Group
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
Table 143 VLAN Configuration Options
Command Syntax and Usage
privlan
Displays the Private VLAN menu. To view menu options, see page 251.
name
Assigns a name to the VLAN or changes the existing name. The default VLAN name is the
first one.
stg <Spanning Tree Group index>
Assigns a VLAN to a Spanning Tree Group.
add <port alias or number>
Adds port(s) to the VLAN membership.
rem <port alias or number>
Removes port(s) from this VLAN.