Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 245
/cfg/l2/hotlink
Hot Links Configuration
Table 139 describes the Hot Links menu options.
[Hot Links Menu]
trigger - Trigger Menu
bpdu - Enable/disable BPDU flood
sndfdb - Enable/disable FDB update
on - Globally turn Hot Links ON
off - Globally turn Hot Links OFF
cur - Display current Hot Links configuration
Table 139 Hot Links Configuration Options
Command Syntax and Usage
trigger <1-25>
Displays the Hot Links Trigger menu. To view menu options, see page 246.
bpdu enable|disable
Enables or disables the ability to flood BPDUs on the active Hot Links interface when the
interface belongs to a Spanning Tree group that is globally turned off.
The default setting is disabled.
sndfdb enable|disable
Enables or disables FDB Update, which allows the switch to send FDB and MAC update
packets over the active interface.
The default setting is disabled.
on
Globally turns Hot Links on. The default value is off.
off
Globally turns Hot Links off.
cur
Displays current Hot Links configuration.