Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 241
/cfg/l2/failovr/trigger <1-8>
Failover Trigger Configuration
[Trigger 1 Menu]
mmon - Manual Monitor Menu
limit - Limit of Trigger
ena - Enable Trigger
dis - Disable Trigger
del - Delete Trigger
cur - Display current Trigger configuration
Table 136 Failover Trigger Options
Command Syntax and Usage
mmon
Displays the Manual Monitor menu for the selected trigger. To view menu options, see
page 242.
limit <0-1024>
Configures the minimum number of operational links allowed within each trigger before the
trigger initiates a failover event. If you enter a value of zero (0), the switch triggers a failover
event only when no links in the trigger are operational.
ena
Enables the selected trigger.
dis
Disables the selected trigger.
del
Deletes the selected trigger.
cur
Displays the current failover trigger settings.