Technical data

BLADE OS 5.0 Command Reference
238
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l2/lacp
LACP Configuration
Use the following commands to configure Link Aggregation Control Protocol (LACP) for the
G8124.
[LACP Menu]
port - LACP Port Menu
sysprio - Set LACP system priority
timeout - Set LACP system timeout scale for timing out partner
info
delete - Delete an LACP trunk
default - Restore default LACP system configuration
cur - Display current LACP configuration
Table 133 LACP Configuration Options
Command Syntax and Usage
port <port alias or number>
Displays the LACP Port menu. To view menu options, see page 239.
sysprio <1-65535>
Defines the priority value (1 through 65535) for the G8124. Lower numbers provide higher
priority. The default value is 32768.
timeout short|long
Defines the timeout period before invalidating LACP data from a remote partner. Choose
short (3 seconds) or long (90 seconds). The default value is long.
Note: It is recommended that you use a timeout value of long, to reduce LACPDU
processing. If your G8124’s CPU utilization rate remains at 100% for periods of 90 seconds
or more, consider using static trunks instead of LACP.
delete <1-65535>
Deletes a selected LACP trunk, based on its admin key.
default sysprio|timeout
Restores the selected parameters to their default values.
cur
Display current LACP configuration.