Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 237
/cfg/l2/thash/set
IP Trunk Hash
Trunk hash parameters are set globally for the G8124. You can enable one or two parameters, to
configure any of the following valid combinations:
 SMAC (source MAC only)
 DMAC (destination MAC only)
 SIP (source IP only)
 DIP (destination IP only)
 SIP + DIP (source IP and destination IP)
 SMAC + DMAC (source MAC and destination MAC)
Use the following commands to configure IP trunk hash parameters for the G8124.
[set IP Trunk Hash Settings Menu]
smac - Enable/disable smac hash
dmac - Enable/disable dmac hash
sip - Enable/disable sip hash
dip - Enable/disable dip hash
cur - Display current trunk hash setting
Table 132 IP Trunk Hash Options
Command Syntax and Usage
smac enable|disable
Enable or disable trunk hashing on the source MAC.
dmac enable|disable
Enable or disable trunk hashing on the destination MAC.
sip enable|disable
Enable or disable trunk hashing on the source IP.
dip enable|disable
Enable or disable trunk hashing on the destination IP.
cur
Display current layer 2 trunk hash setting.