Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 221
lacp
Displays the Link Aggregation Control Protocol menu. To view menu options, see page 238.
failovr
Displays the Failover Configuration menu. To view menu options, see page 240.
hotlink
Displays the Hot Links Configuration menu. To view menu options, see page 245.
vlan <VLAN number (1-4094)>
Displays the VLAN Configuration menu. To view menu options, see page 249.
pvstcomp enable|disable
Enables or disables VLAN tagging of Spanning Tree BPDUs. The default setting is
enabled.
upfast enable|disable
Enables or disables Fast Uplink Convergence, which provides rapid Spanning Tree
convergence to an upstream switch during failover.
Note: When enabled, this feature increases bridge priorities to 65535 for all STGs and path
cost by 3000 for all external STP ports.
update <10-200>
Configures the station update rate. The default value is 40.
cur
Displays current Layer 2 parameters.
Table 120 Layer 2 Configuration Menu Options
Command Syntax and Usage