Technical data

BLADE OS 5.0 Command Reference
220
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l2
Layer 2 Configuration Menu
[Layer 2 Menu]
mrst - Multiple Spanning Tree/Rapid Spanning Tree Menu
nostp - Disable Spanning Tree
stp - Spanning Tree Menu
fdb - FDB Menu
trunk - Trunk Group Menu
thash - Trunk Hash Menu
lacp - Link Aggregation Control Protocol Menu
failovr - Failover Menu
hotlink - Hot Links Menu
vlan - VLAN Menu
pvstcomp - Enable/disable PVST+ compatibility mode
upfast - Enable/disable Uplink Fast
update - UplinkFast station update rate
cur - Display current layer 2 parameters
Table 120 Layer 2 Configuration Menu Options
Command Syntax and Usage
mrst
Displays the Rapid Spanning Tree/Multiple Spanning Tree Protocol Configuration menu. To
view menu options, see page 222.
nostp enable|disable
When enabled, globally turns Spanning Tree off. All ports are placed into forwarding state.
Any BPDU’s received are flooded. BPDU Guard is not affected by this command.
stp <group number (1-128)>
Displays the Spanning Tree Configuration menu. To view menu options, see page 228.
fdb
Displays the Forwarding Database menu. To view menu options, see page 233.
trunk <trunk number (1-12)>
Displays the Trunk Group Configuration menu. To view menu options, see page 235.
thash
Displays the IP Trunk Hash menu. To view menu options, see page 236.