Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 219
/cfg/pmirr/monport <port alias or number>
Port-Mirroring Configuration
[Port 1 Menu]
add - Add "Mirrored" port
rem - Rem "Mirrored" port
delete - Delete this "Monitor" port
cur - Display current Port-based Port Mirroring configuration
Table 119 Port Mirroring Monitor Port Options
Command Syntax and Usage
add <mirrored port (port to mirror from)> <direction (in, out, or both)>
Adds the port to be mirrored. This command also allows you to enter the direction of the
traffic. It is necessary to specify the direction because:
If the source port of the frame matches the mirrored port and the mirrored direction is ingress
or both (ingress and egress), the frame is sent to the monitoring port.
If the destination port of the frame matches the mirrored port and the mirrored direction is
egress or both, the frame is sent to the monitoring port.
rem <mirrored port (port to mirror from)>
Removes the mirrored port.
delete
Deletes this monitor port.
cur
Displays the current settings of the monitoring port.