Technical data

BLADE OS 5.0 Command Reference
206
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/qos/dscp
DSCP Configuration
Use this menu map the DiffServ Code Point (DSCP) value of incoming packets to a new value, or
to an 802.1p priority value.
[dscp Menu]
dscp - Remark DSCP value to a new DSCP value
prio - Remark DSCP value to a 802.1p priority
on - Globally turn DSCP remarking ON
off - Globally turn DSCP remarking OFF
cur - Display current DSCP remarking configuration
Table 106 DSCP Options
Command Syntax and Usage
dscp <DSCP (0-63)> <new DSCP (0-63)>
Maps the initial DiffServ Code Point (DSCP) value to a new value. Enter the DSCP value
(0-63) of incoming packets, followed by the new value.
prio <DSCP (0-63)> <priority (0-7)>
Maps the DiffServ Code point value to an 802.1p priority value. Enter the DSCP value,
followed by the corresponding 802.1p value.
on
Turns on DSCP re-marking globally.
off
Turns off DSCP re-marking globally.
cur
Displays the current DSCP parameters.