Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 205
/cfg/qos/8021p
802.1p Configuration
This feature provides the capability to filter IP packets based on the 802.1p bits in the packet's
VLAN header. The 802.1p bits specify the priority that you should give to the packets while
forwarding them. The packets with a higher (non-zero) priority bits are given forwarding preference
over packets with numerically lower priority bits value.
[802.1p Menu]
priq - Set priority to COS queue mapping
qweight - Set weight to a COS queue
default - Reset 802.1p configuration to default values.
cur - Display current 802.1p configuration
Table 105 802.1p Options
Command Syntax and Usage
priq <priority (0-7)> <COSq number>
Maps the 802.1p priority to the Class of Service queue (COSq) priority. Enter the 802.1p
priority value (0-7), followed by the COSq that handles the matching traffic. The valid range
of the COSq number is set using the numcos command.
qweight <COSq number> <weight (0-15)>
Configures the weight of the selected COSq. Enter the COSq number, followed by the
scheduling weight (0-15). The valid range of the COSq number is set using the numcos
command.
default
Resets 802.1p parameters to their default values.
cur
Displays the current 802.1p parameters.