Technical data

BLADE OS 5.0 Command Reference
202
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/port <port alias or number>/aclqos
Port ACL Configuration
auto on|off
Turns auto-negotiation on or off.
Note: Data ports are fixed at 10000 Mbps, and cannot be set to auto-negotiate, unless a 1 Gb
SFP transceiver is used.
cur
Displays current port parameters.
Table 101 Port Link Configuration Options
Command Syntax and Usage
[Port 1 ACL Menu]
add - Add ACL to this port
rem - Remove ACL from this port
cur - Display current ACLs for this port
Table 102 Port ACL Options
Command Syntax and Usage
add acl <1-254>
Adds the specified ACL to the port. You can add multiple ACLs to a port, but the total
number of precedence levels allowed is two.
rem acl <1-254>
Removes the specified ACL from the port.
cur
Displays current ACL QoS parameters.