Technical data

BLADE OS 5.0 Command Reference
200
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/port <port alias or number>/errdis
Port Error Disable and Recovery Configuration
The Error Disable and Recovery feature allows the switch to automatically disable a port if an error
condition is detected on the port. The port remains in the error-disabled state until it is re-enabled
manually, or re-enabled automatically by the switch after a timeout period has elapsed. The
error-disabled state of a port does not persist across a system reboot.
[Port 2 ErrDisable Menu]
ena - Enable ErrDisable recovery
dis - Disable ErrDisable recovery
cur - Display current ErrDisable configuration
Table 100 Port Error Disable Configuration Options
Command Syntax and Usage
ena
Enables automatic error-recovery for the port. The default setting is enabled.
Note: Error-recovery must be enabled globally before port-level commands become active
(/cfg/sys/errdis/ena).
dis
Enables automatic error-recovery for the port.
cur
Displays current port Error Disable parameters.