Technical data

BLADE OS 5.0 Command Reference
198
 Chapter 6: The Configuration Menu BMD00142, November 2009
8021ppri <0-7>
Configures the port’s 802.1p priority level.
pvid <VLAN number>
Sets the default VLAN number which will be used to forward frames which are not VLAN
tagged. The default number is 1 for non-management ports.
name <1-64 characters>|none
Sets a name for the port. The assigned port name appears next to the port number on some
information and statistics screens. The default setting is none.
bpdugrd e|d
Enables or disables BPDU guard, to avoid Spanning-Tree loops on ports with Port Fast
Forwarding enabled (/cfg/l2/stp x/port x/fastfwd ena), or ports configured as
edge ports.
dscpmark e|d
Enables or disables DSCP re-marking on a port. The default setting is disabled.
learn disable|enable
Enables or disables FDB learning on the port.
tag disable|enable
Disables or enables VLAN tagging for this port. The default setting is disabled.
tagpvid disable|enable
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is removed from
packets whose VLAN tag matches the port PVID. The default setting is disabled.
floodblk disable|enable
Enables or disables port Flood Blocking. When enabled, unicast and multicast packets with
unknown destination MAC addresses are blocked from the port.
macnotif enable|disable
Enables or disables MAC Address Notification. With MAC Address Notification enabled, the
switch generates a syslog message when a MAC address is added or removed from the MAC
address table.
Table 99 Port Configuration Menu
Command Syntax and Usage