Technical data

BLADE OS 5.0 Command Reference
194
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/sys/dst
Custom Daylight Savings Time Configuration
Use this menu to configure custom Daylight Savings Time. The DST will be defined by two rules,
the start rule and end rule. The rules specify the date and time when the DST starts and finishes.
These dates are represented as specific calendar dates or as relative offsets in a month
(for example, 'the second Sunday of September').
Relative offset example:
2070901 = Second Sunday of September, at 1:00 a.m.
Calendar date example:
0070901 = September 7, at 1:00 a.m.
[Custom DST Menu]
dststart - Set the DST start day
dstend - Set the DST stop day
ena - Enable custom DST
dis - Disable custom DST
cur - Display custom DST configuration
Table 96 Custom DST Configuration Options
Command Syntax and Usage
dststart {<WDDMMhh>}
Configures the start date for custom DST, as follows:
WDMMhh
W = week (0-5, where 0 means use the calender date)
D = day of the week (01-07, where 01 is Monday)
MM = month (1-12)
hh = hour (0-23)
dstend {<WDDMMhh>}
Configures the end date for custom DST, as follows:
WDMMhh
W = week (0-5, where 0 means use the calender date)
D = day of the week (01-07, where 01 is Monday)
MM = month (1-12)
hh = hour (0-23)
ena
Enables the Custom Daylight Savings Time settings.