Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 193
/cfg/sys/access/https
HTTPS Access Configuration
[https Menu]
access - Enable/Disable HTTPS Web access
port - HTTPS WebServer port number
generate - Generate self-signed HTTPS server certificate
certSave - save HTTPS certificate
cur - Display current SSL Web Access configuration
Table 95 HTTPS Access Configuration Options
Command Syntax and Usage
access ena|dis
Enables or disables BBI access (Web access) using HTTPS.
port <TCP port number>
Defines the HTTPS Web server port number.
generate
Allows you to generate a certificate to connect to the SSL to be used during the key exchange.
A default certificate is created when HTTPS is enabled for the first time. The user can create
a new certificate defining the information that they want to be used in the various fields. For
example:
 Country Name (2 letter code) []: CA
 State or Province Name (full name) []: Ontario
 Locality Name (for example, city) []: Ottawa
 Organization Name (for example, company) []: Blade
 Organizational Unit Name (for example, section) []: Datacenter
 Common Name (for example, user’s name) []: Mr Smith
 Email (for example, email address) []: [e-mail]
You will be asked to confirm if you want to generate the certificate. It will take approximately
30 seconds to generate the certificate. Then the switch will restart SSL agent.
certSave
Allows the client, or the Web browser, to accept the certificate and save the certificate to Flash
to be used when the switch is rebooted.
cur
Displays the current SSL Web Access configuration.