Technical data

BLADE OS 5.0 Command Reference
186
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/sys/ssnmp/snmpv3/notify
SNMPv3 Notify Table Configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system
for particular events or conditions, and generates Notification-Class messages based on these events
or conditions.
del
Deletes the targetParamsTable entry.
cur
Displays the current targetParamsTable configuration.
Table 88 Target Parameters Table Configuration Options
Command Syntax and Usage
[SNMPv3 snmpNotifyTable 1 Menu]
name - Set notify name
tag - Set notify tag
del - Delete notifyTable entry
cur - Display current notifyTable configuration
Table 89 Notify Table Options
Command Syntax and Usage
name <1-32 characters>
Defines a locally arbitrary but unique identifier associated with this SNMP notify entry.
tag <1-255 characters>
Allows you to configure a tag that contains a tag value which is used to select entries in the
Target Address Table. Any entry in the snmpTargetAddrTable, that matches the value
of this tag is selected.
del
Deletes the notify table entry.
cur
Displays the current notify table configuration.