Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 175
Table 80 System SNMP Options
Command Syntax and Usage
snmpv3
Displays SNMPv3 menu. To view menu options, see page 176.
name <1-64 characters>
Configures the name for the system.
locn <1-64 characters>
Configures the name of the system location.
cont <1-64 characters>
Configures the name of the system contact.
rcomm <1-32 characters>
Configures the SNMP read community string. The read community string controls SNMP
“get” access to the switch. The default read community string is public.
wcomm <1-32 characters>
Configures the SNMP write community string. The write community string controls SNMP
“set” and “get” access to the switch. The default write community string is private.
trsrc <interface number>
Configures the source interface for SNMP traps. The default value is interface 1.
To send traps through management port A, specify interface 127.
timeout <1-30>
Set the timeout value for the SNMP state machine, in minutes.
auth disable|enable
Enables or disables the use of the system authentication trap facility. The default setting is
disabled.
linkt <port> [disable|enable]
Enables or disables the sending of SNMP link up and link down traps. The default setting is
enabled.
cur
Displays the current SNMP configuration.