Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 173
/cfg/sys/ntp
NTP Server Configuration
This menu enables you to synchronize the switch clock to a Network Time Protocol (NTP) server.
By default, this option is disabled.
[NTP Server Menu]
prisrv - Set primary NTP server hostname|IP address
secsrv - Set secondary NTP server hostname|IP address
intrval - Set NTP server resync interval
on - Turn NTP service ON
off - Turn NTP service OFF
cur - Display current NTP configuration
Table 79 NTP Configuration Options
Command Syntax and Usage
prisrv {<host name>|<IP address>}
Prompts for the hostname or IP addresses of the primary NTP server to which you want to
synchronize the switch clock.
secsrv {<host name>|<IP address>}
Prompts for the hostname or IP addresses of the secondary NTP server to which you want to
synchronize the switch clock.
intrval <5-44640>
Specifies the time interval, in minutes, to re-synchronize the switch clock with the NTP
server.
on
Enables the NTP synchronization service.
off
Disables the NTP synchronization service.
cur
Displays the current NTP service settings.