Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 159
dlight enable|disable
Disables or enables daylight savings time in the system clock. When enabled, the switch will
add an extra hour to the system clock so that it is consistent with the local clock.
The default value is disabled.
idle <idle timeout in minutes>
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default is 10 minutes.
notice <maximum 1024 character multi-line login notice> <'.' to end>
Displays login notice immediately before the “Enter password:” prompt. This notice can
contain up to 1024 characters and new lines.
bannr <string, maximum 80 characters>
Configures a login banner of up to 80 characters. When a user or administrator logs into the
switch, the login banner is displayed. It is also displayed as part of the output from the
/info/sys command.
hprompt disable|enable
Enables or disables displaying of the host name (system administrator’s name) in the
Command Line Interface (CLI).
bootp e|d
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will query its
BOOTP server for all of the switch IP parameters. The default setting is enabled.
dhcp [mgta|mgtb] [enable|disable]
Enables or disables Dynamic Host Control Protocol for setting the IP address on the selected
management interface. When enabled, the IP address obtained from the DHCP server
overrides the static IP address. The default setting is enabled.
reminder disable|enable
Enables or disables reminder messages in the CLI. The default value is enabled.
Table 72 System Configuration Menu Options
Command Syntax and Usage