Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 5: The Statistics Menu
 151
Note – Use the following command to delete all NTP statistics: /stats/ntp clear
/stats/dump
Statistics Dump
Use the dump command to dump all switch statistics available from the Statistics menu (40K or
more, depending on your configuration). This data can be used to tune or debug switch
performance.
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
Last update based on
response from primary
server
Last update of time on the switch based on either primary or
secondary NTP response received.
Last update time The time stamp showing the time when the switch was last updated.
Current system time The switch system time when the following command was issued:
/stats/ntp
Table 70 NTP Statistics
Field Description