Technical data

BLADE OS 5.0 Command Reference
106
 Chapter 4: The Information Menu BMD00142, November 2009
/info/transcvr
Port Transceiver Status
This command displays the status of the transceiver module on each external port.
/info/dump
Information Dump
Use the dump command to dump all switch information available from the Information menu (10K
or more, depending on your configuration). This data is useful for tuning and debugging switch
performance.
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
Ports :
SFP1 SFP+: Is Present NOT APPROVED
SFP2 SFP+: Is Present Is Approved
Vendor:Blade Network Part:BN-CKM-SP-SR Rev:-SP-
Laser:850nm Serial:AD0752E01KL Date:071225
SFP3 SFP+: Is Present NOT APPROVED
SFP4 SFP+: Is Present NOT APPROVED