Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 2: Information Commands
 99
ECMP Static Route Information
The following command displays ECMP route information:
show ip ecmp
Command mode: All
ECMP route information shows the status of each ECMP route configured on the switch.
Interface Information
The following command displays interface information:
show interface ip
Command mode: All
For each interface, the following information is displayed:
 IPv4 interface address and subnet mask
 IPv6 address and prefix
 VLAN assignment
 Status (up, down, disabled)
Current ecmp static routes:
Destination Mask Gateway If GW Status
--------------- --------------- --------------- ---- -----------
10.10.1.1 255.255.255.255 100.10.1.1 1 up
200.20.2.2 1 down
10.20.2.2 255.255.255.255 10.233.3.3 1 up
10.20.2.2 255.255.255.255 10.234.4.4 1 up
10.20.2.2 255.255.255.255 10.235.5.5 1 up
ECMP health-check ping interval: 1
ECMP health-check retries number: 3
ECMP Hash Mechanism: dipsip
Interface information:
1: IP4 172.31.35.5 255.255.0.0 172.31.255.255, vlan 1, up
2: IP6 2002:0:0:0:0:0:0:5/64 , vlan 1, up
fe80::213:aff:fe4f:7c01