Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 2: Information Commands
 91
OSPFv3 Information
Table 41 OSPFv3 Information Options
Command Syntax and Usage
show ipv6 ospf area <area index (0-2)>
Displays the area information
show ipv6 ospf areas
Displays the OSPFv3 Area Table.
Command mode: All
show ipv6 ospf interface <interface number>
Displays interface information for a particular interface. If no parameter is supplied, it
displays information for all the interfaces. To view a sample display, see page 93.
Command mode: All
show ipv6 ospf area-virtual-link
Displays information about all the configured virtual links.
Command mode: All
show ipv6 ospf neighbor <nbr router-id (A.B.C.D)>
Displays the status of a neighbor with a particular router ID. If no router ID is supplied, it
displays the information about all the current neighbors.
Command mode: All
show ipv6 ospf host
Displays OSPFv3 host configuration information.
Command mode: All
show ipv6 ospf request-list <nbr router-id (A.B.C.D)>
Displays the OSPFv3 request list. If no router ID is supplied, it displays the information about
all the current neighbors.
Command mode: All
show ipv6 ospf retrans-list <nbr router-id (A.B.C.D)>
Displays the OSPFv3 retransmission list. If no router ID is supplied, it displays the
information about all the current neighbors.
Command mode: All