Technical data

BLADEOS 6.3 Command Reference
88
 Chapter 2: Information Commands BMD00186-B, April 2010
OSPF Interface Information
The following command displays OSPF interface information:
show ip ospf interface <interface number>
Command mode: All
OSPF Database Information
Ip Address 10.10.12.1, Area 0.0.0.1, Admin Status UP
Router ID 10.10.10.1, State DR, Priority 1
Designated Router (ID) 10.10.10.1, Ip Address 10.10.12.1
Backup Designated Router (ID) 10.10.14.1, Ip Address 10.10.12.2
Timer intervals, Hello 10, Dead 40, Wait 1663, Retransmit 5,
Poll interval 0, Transit delay 1
Neighbor count is 1 If Events 4, Authentication type none
Table 40 OSPF Database Information Commands
Command Syntax and Usage
show ip ospf database advertising-router <router ID>
Takes advertising router as a parameter. Displays all the Link State Advertisements (LSAs) in
the LS database that have the advertising router with the specified router ID, for example:
20.1.1.1.
Command mode: All
show ip ospf database asbr-summary [advertising-router <router ID>|
link-state-id <A.B.C.D>|self]
Displays ASBR summary LSAs. The usage of this command is as follows:
a. asbrsum adv-rtr 20.1.1.1 displays ASBR summary LSAs having the advertising
router 20.1.1.1.
b. asbrsum link-state-id 10.1.1.1 displays ASBR summary LSAs having the link
state ID 10.1.1.1.
c. asbrsum self displays the self advertised ASBR summary LSAs.
d. asbrsum with no parameters displays all the ASBR summary LSAs.
Command mode: All