Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 2: Information Commands
85
OSPF Information
Table 39 OSPF Information Commands
Command Syntax and Usage
show ip ospf general-information
Displays general OSPF information.
Command mode: All
See page 87 for a sample output.
show ip ospf area information
Displays area information for all areas.
Command mode: All
show ip ospf area <0-2>
Displays area information for a particular area index.
Command mode: All
show interface ip {<interface number>} ospf
Displays interface information for a particular interface. If no parameter is supplied, it
displays information for all the interfaces.
Command mode: All
See page 88 for a sample output.
show ip ospf area-virtual-link information
Displays information about all the configured virtual links.
Command mode: All
show ip ospf neighbor
Displays the status of all the current neighbors.
Command mode: All
show ip ospf summary-range <0-2>
Displays the list of summary ranges belonging to non-NSSA areas.
Command mode: All