Technical data

BLADEOS 6.3 Command Reference
80
 Chapter 2: Information Commands BMD00186-B, April 2010
ARP Information
The ARP information includes IP address and MAC address of each entry, address status flags (see
Table 37 on page 81), VLAN and port for the address, and port referencing information.
Table 36 ARP Information Commands
Command Syntax and Usage
show ip arp find <IP address>
Displays a single ARP entry by IP address.
Command mode: All
show ip arp interface port <port alias or number>
Displays the ARP entries on a single port.
Command mode: All
show ip arp vlan <VLAN number>
Displays the ARP entries on a single VLAN.
Command mode: All
show ip arp
Displays all ARP entries. including:
 IP address and MAC address of each entry
 Address status flag (see below)
 The VLAN and port to which the address belongs
 The ports which have referenced the address (empty if no port has routed traffic to the IP
address shown)
Command mode: All
For more information, see page 81.
show ip arp reply
Displays the ARP address list: IP address, IP mask, MAC address, and VLAN flags.
Command mode: All