Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 2: Information Commands
 77
IP Routing Information
Using the commands listed below, you can display all or a portion of the IP routes currently held in
the switch.
Table 33 Route Information Commands
Command Syntax and Usage
show ip route address <IP address>
Displays a single route by destination IP address.
Command mode: All
show ip route gateway <IP address>
Displays routes to a single gateway.
Command mode: All
show ip route type {indirect|direct|local|broadcast|martian|
multicast}
Displays routes of a single type. For a description of IP routing types, see Table 34 on
page 78.
Command mode: All
show ip route tag {fixed|static|addr|rip|ospf|bgp|broadcast|
martian|multicast}
Displays routes of a single tag. For a description of IP routing tags, see Table 35 on page 79.
Command mode: All
show ip route interface <interface number>
Displays routes on a single interface.
Command mode: All
show ip route static
Displays static routes configured on the switch.
Command mode: All
show ip route
Displays all routes configured in the switch.
Command mode: All
For more information, see page 78.