Technical data

BLADEOS 6.3 Command Reference
76
 Chapter 2: Information Commands BMD00186-B, April 2010
show ip information
Displays IP Information. For details, see page 77.
IP information, includes:
 IP interface information: Interface number, IP address, subnet mask, VLAN number, and
operational status.
 Default gateway information: Metric for selecting which configured gateway to use,
gateway number, IP address, and health status
 IP forwarding settings, network filter settings, route map settings
Command mode: All
show ip igmp groups
Displays IGMP Information.
Command mode: All
show ip vrrp information
Displays VRRP information.
Command mode: All
For details, see page 106.
show layer3
Dumps all Layer 3 switch information available (10K or more, depending on your
configuration).
If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump commands.
Command mode: All
Table 32 Layer 3 Information Commands (continued)
Command Syntax and Usage