Technical data

BLADEOS 6.3 Command Reference
72
 Chapter 2: Information Commands BMD00186-B, April 2010
Trunk Group Information
The following command displays Trunk Group information:
show portchannel information
Command mode:
All
When trunk groups are configured, you can view the state of each port in the various trunk groups.
Note – If Spanning Tree Protocol on any port in the trunk group is set to forwarding, the
remaining ports in the trunk group will also be set to forwarding.
Trunk group 1: Enabled
Protocol - Static
Port state:
1: STG 1 forwarding
2: STG 1 forwarding