Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 2: Information Commands
 51
 Aggregator links
 Number of active (enabled) AMP groups
 Group information
 Group number
 Group state (up or DOWN)
 Ports/portchannels in the group
 Link information
 Port number
 State (fwd, BLOCK, or DOWN)
 Portchannel (trunk) number
Show AMP Group Information
The following command displays Active MultiPath (AMP) Group information:
show active-multipath group [<AMP group number>] information
Command mode:
All
This display shows AMP group information for an AMP access switch. AMP group information
includes the following:
 AMP group number and topology status (UP or DOWN)
 AMP link 1:
 Switch type (access/aggregator)
 State (forwarding, BLOCKING, or DOWN)
 Peer information (MAC address, switch type, AMP priority)
 AMP link 2:
 Switch type (access/aggregator)
 State (forwarding, BLOCKING, or DOWN)
 Peer information (MAC address, switch type, AMP priority)
Group 3: enabled, topology UP
Port 10: access
State : forwarding
Peer : 00:22:00:ac:d7:00
aggregator, priority 100
Port 11: access
State : forwarding
Peer : 00:25:03:49:82:00
aggregator, priority 1