Technical data

BLADEOS 6.3 Command Reference
50
 Chapter 2: Information Commands BMD00186-B, April 2010
Show AMP Global Information
The following command displays global Active MultiPath (AMP) information:
show active-multipath information
Command mode:
All
This displays show global AMP information for an AMP aggregator switch. AMP global
information includes the following:
 Active MultiPath Protocol information:
 AMP status (enabled or disabled)
 Protocol version
 Switch ID (MAC address)
 Switch type (access or aggregator)
 Priority
 Interval between AMP keep-alive packets
 Timeout count
 Aggregator precedence (1 or 2)
Active Multipath Protocol: enabled
Protocol version : 2
Switch id : 00:22:00:ee:cd:00
Switch type : aggregator
Switch priority : 100
Packet interval : 50 centiseconds
Timeout count : 4
Aggr. precedence : 1
Aggr. link : PoCh 2 (Ports 12 13)
No. of groups : 3
Group State Ports
----- ----- -----
1 up PoCh 1
2 up PoCh 13 [LACP 100]
3 up 21
Port State PoCh
----- ----- -----
1 fwd 1
2 fwd 1
12 fwd 2
13 fwd 2
17 fwd 13
18 fwd 13
21 fwd