Technical data

BLADEOS 6.3 Command Reference
48
 Chapter 2: Information Commands BMD00186-B, April 2010
show failover trigger <1-8>
Displays Layer 2 Failover information.
Command mode: All
For details, see page 56.
show hotlinks information
Displays Hot Links information.
Command mode: All
For details, see page 58.
show layer2 information
Dumps all Layer 2 switch information available (10K or more, depending on your
configuration).
If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump commands.
Command mode: All
Table 17 Layer 2 Information Commands (continued)
Command Syntax and Usage