Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 7: Maintenance Commands
 435
Clearing Dump Information
To clear dump information from flash memory, enter:
The switch clears the dump region of flash memory and displays the following message:
If the flash dump region is already clear, the switch displays the following message:
Unscheduled System Dumps
If there is an unscheduled system dump to flash memory, the following message is displayed when
you log on to the switch:
Router# clear flash-dump
FLASH dump region cleared.
FLASH dump region is already clear.
Note: A system dump exists in FLASH. The dump was saved
at 13:43:22 Wednesday January 30, 2010. Use show flash-dump
uuencode to
extract the dump for analysis and clear flash-dump to
clear the FLASH region. The region must be cleared
before another dump can be saved.