Technical data

BLADEOS 6.3 Command Reference
404
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Configuration Dump
The dump program writes the current switch configuration to the terminal screen. To start the dump
program, at the prompt, enter:
The configuration is displayed with parameters that have been changed from the default values. The
screen display can be captured, edited, and placed in a script file, which can be used to configure
other switches through a Telnet connection. When using Telnet to configure a new switch, paste the
configuration commands from the script file at the command line prompt of the switch. The active
configuration can also be saved or loaded via FTP/TFTP, as described on page 405.
[no] virt vmware vcspec [<IP address>|[<username> noauth]
Defines the Virtual Center credentials on the switch. Once you configure the Virtual Center,
VM Agent functionality is enabled across the system.
You are prompted for the following information:
 IP address of the Virtual Center
 User name and password for the Virtual Center
 Whether to authenticate the SSL security certificate (yes or no)
Command mode: Global configuration
show virt vmware
Displays the current VMware parameters.
Command mode: All
Router(config)# show running-config
Table 259 VM Ware commands
Command Syntax and Usage