Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 403
VM Ware Configuration
Table 259 describes the VMware configuration options.When the user configures the VMware
Virtual Center, the VM Agent module in the switch can perform advanced functionality by
communicating with the VMware management console. The Virtual Center provides VM and Host
names, IP addresses, Virtual Switch and port group information. The VM Agent on the switch
communicates with the Virtual Center to synchronize VM profiles between the switch and the
VMware virtual switch.
[no] virt vmprofile edit <profile name (1-39 characters)> shaping
[<average (1-1000000000)> <burst (1-1000000000)> <peak (1-1000000000)>]
Configures traffic shaping parameters implemented in the hypervisor, as follows:
 Average traffic, in Kilobits per second
 Maximum burst size, in Kilobytes
 Peak traffic, in Kilobits per second
 Delete traffic shaping parameters.
Command mode: Global configuration
show virt vmprofile [<profile name>]
Displays the current VM Profile parameters.
Command mode: All
Table 259 VM Ware commands
Command Syntax and Usage
virt vmware hbport <1-65535>
Configures the UDP port number used for heartbeat communication from the VM host to the
Virtual Center. The default value is port 902.
Command mode: Global configuration
Table 258 VM Profiles commands
Command Syntax and Usage