Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 401
no virt vmgroup <1-32> vm [<MAC address>|<UUID>|<name>|
<IP address>|<index number>]
Removes a VM from the VM group. Enter a unique identifier to select a VM.
The UUID and name parameters apply only if Virtual Center information is configured
(virt vmware vcspec).
The VM index number is found in the VM information dump (show virt vm).
Command mode: Global configuration
virt vmgroup <1-32> profile <profile name (1-39 characters)>
Adds the selected VM profile to the VM group.
Command mode: Global configuration
no virt vmgroup <1-32> profile
Removes the VM profile assigned to the VM group.
Command mode: Global configuration
virt vmgroup <1-32> port <port alias or number>
Adds the selected port to the VM group.
Note: A port can be added to a VM group only if no VMs on that port are members of the
VM group.
Command mode: Global configuration
no virt vmgroup <1-32> port <port alias or number>
Removes the selected port from the VM group.
Command mode: Global configuration
virt vmgroup <1-32> portchannel <trunk number>
Adds the selected trunk group to the VM group.
Command mode: Global configuration
no virt vmgroup <1-32> portchannel <trunk number>
Removes the selected trunk group from the VM group.
Command mode: Global configuration
Table 257 VM Group commands
Command Syntax and Usage