Technical data

BLADEOS 6.3 Command Reference
398
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Virtual NIC Group Configuration
Table 256 describes the Virtual NIC (vNIC) Group configuration options.
Table 256 vNIC Group commands
Command Syntax and Usage
vnic vnicgroup <1-32>
Enters vNIC Group Configuration mode.
Command mode: Global Configuration
vlan <VLAN number>
Assigns a VLAN to the vNIC Group.
Command mode: vNIC Group configuration
[no] failover
Enables or disables uplink failover for the vNIC Group. Uplink Failover for the vNIC Group
will disable only the affected vNIC links on the port. Other port functions continue to operate
normally.
The default setting is disabled.
Command mode: vNIC Group configuration
member <vNIC number>
Adds a vNIC to the vNIC Group. The vNIC ID is comprised of the port number and the vNIC
number. For example: 1.1
Command mode: vNIC Group configuration
no member <vNIC number>
Removes the selected vNIC from the vNIC Group.
Command mode: vNIC Group configuration
port <port number or alias>
Adds the selected switch port to the vNIC Group.
Command mode: vNIC Group configuration
no port <port number or alias>
Removes the selected switch port from the vNIC Group.
Command mode: vNIC Group configuration