Technical data

BLADEOS 6.3 Command Reference
386
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Priority Flow Control Configuration
Priority-based Flow Control (PFC) enhances flow control by allowing the switch to pause traffic
based on its 802.1p priority value, while allowing traffic at other priority levels to continue.
802.1p PFC Configuration
Table 246 describes the 802.1p Priority Flow Control (PFC) configuration options.
Table 245 PFC 802.1p commands
Command Syntax and Usage
cee global pfc priority <0-7> enable
Enables Priority Flow Control on the selected 802.1p priority.
Command mode: Global configuration
no cee global pfc priority <0-7> enable
Disables Priority Flow Control on the selected 802.1p priority.
Command mode: Global configuration
cee cee global pfc priority <0-7> description <1-31 characters>
Enter text to describe the priority value.
Command mode: Global configuration
show cee global pfc priority <0-7>
Displays the current 802.1p Priority Flow Control parameters.
Command mode: All