Technical data

BLADEOS 6.3 Command Reference

 Chapter 2: Information Commands BMD00186-B, April 2010

SNMPv3 Target Address Table Information

The following command displays SNMPv3 target address information:

show snmp-server v3 target-address

Command mode:

All

This command displays the SNMPv3 target address table information, which is stored in the SNMP

engine.

Name Transport Addr Port Taglist Params

---------- --------------- ---- ---------- ---------------

trap1 47.81.25.66 162 v1v2trap v1v2param

Table 14 SNMPv3 Target Address Table Information Parameters

Field Description

Name Displays the locally arbitrary, but unique identifier associated with this

snmpTargetAddrEntry.

Transport Addr Displays the transport addresses.

Port Displays the SNMP UDP port number.

Taglist This column contains a list of tag values which are used to select target

addresses for a particular SNMP message.

Params The value of this object identifies an entry in the

snmpTargetParamsTable. The identified entry contains SNMP

parameters to be used when generating messages to be sent to this transport

address.